The NIXON I bought more than ten years ago had stopped. I knew the battery was dead, but it did not feel worth taking to a watch shop, so I decided to boldly replace it myself.
What I prepared
- Precision screwdriver (a small Phillips for watches)
- Replacement button cell (check the model number printed on the case back)
- Tweezers
- A soft cloth
The only special tool was the precision screwdriver; everything else was already in the house. I checked the battery model number in advance from the engraving on the case back.
What I felt actually doing it
The screws on the case back were smaller than I expected, and I was careful because applying force the wrong way could strip them. Also, if the waterproof gasket shifts, the watch loses its water resistance, so I kept checking the gasket's orientation, both when opening and closing.
NIXONいいよね。
Summary
The job itself took about 15 minutes, but I learned the waterproof gasket is something I will have to keep being careful about. When the watch started running again, I was happier than I expected. Next I want to try replacing the strap too.
KAZUKIN Rating
- 🔧 Satisfaction of replacing the battery myself — ★★★★★
- 😰 Fear of stripping the screws — ★★★★☆
- 💧 Tension over the waterproof gasket — ★★★★★
- ⏱️ Work time (15 minutes) — ★★★★☆
- 🎯 Drive to try a strap swap next — ★★★★☆
This article is a personal opinion and record. KAZUKIN LAB has no relationship with NIXON. I'm just a NIXON fan. Disassembly such as battery replacement is done at my own risk. All trademarks belong to their respective owners.
The illustration is an image based on KAZUKIN's experience. It may differ from real stores and products. It is not an official manufacturer image.